Analytic Systems BCA1000-110-72

SKU: BCA1000-110-72-CT-BC-CA
13A, 72V Out, 110 VAC In, AC/DC Battery Charger, 2 Bank, CSA/UL
Sector:
Material Handling, Switchgear
Need:
Minimum Quantity
1
My Wishlist
Compare
F-2-4w.png
Description

The BCA1000 provides up to 1000 watts of precision charging power to up to two banks of batteries at 12, 24, 32, 36, 48 or 72(rail) volts DC from a 110 or 220 volts AC power source. The output voltage is easily adjusted 1.0 volts above or below the standard output voltage for standard or deep cycle lead-acid, VRLA or Gel cell type battery.

All models feature user selectable 2-stage or 3-stage charging profiles and temperature compensation for optimum charging. Additionally, user-initiated equalization and voltage temperature compensation greatly increases the lifetime of expensive battery systems.

Extra input and output filtering reduce EMI to extremely low levels and operation is monitored by a bright status indicator LED panel. Reliability features include an input fuse, thermal shutdown, current limiting, reverse battery hookup protection and output short circuit shutdown with automatic recovery.

Features
  • 150 watts of charging power
  • Two or three bank charging
  • Temperature compensation
  • Manual equalization mode
  • Two or three stage charging profiles
  • Low EMI
  • Adjustable float voltage
  • Three year parts and labour warranty
  • Typical Service Life : > 10 years (87,600 hrs)

Details

Volt Range: 13.6 VDC
Input Voltage: 90 - 130 VAC
Input Current: 3 Amps with Inrush Protection
Input Frequency: 45 - 65 Hz
Efficiency: > 90 % at Full Load
Power Factor: > 0.98 at Full Load
Constant Output Voltage: 72V
Output Current: 13A
Duty Cycle: Continuous
Stages: 2 or 3 stage user selectable
Humidity: 0 - 95% Relative Humidity (non-condensing) with standard conformal coating
Switching Frequency: 45-65 ± 5% kHz
Phase: Single Phase
Isolation Input-Case: > 1500 VDC
Isolation Input-Output: > 1500 VDC
Isolation Output-Case: > 1500 VDC
Input Fuse: MDA-25
Output Fuse: ATC-25 x2
Length: 36.8 CM
Width: 25.1 CM
Height: 12.7 CM
Weight: 5.5 KG

Construction

  • Material and Finish : Marine Grade Black Anodized Aluminum with 18-8 Stainless Fasteners
  • Wall Mount (With Drip Shield)
  • Connections : AC Input - IEC Inlet 26.4mm Tab Flange Mount, DC Output - Phoenix VDFK 4 Connector (Black and Red)

Applications

  • Military
  • Industrial
  • Telecommunications
  • Transportation
  • Alternative Energy

Standards

  • Emissions Meets FCC Part 14, Class B
  • Warranty : Three Years Parts and Labor
  • Safety Built to meet CSA C22.2 No.107.1 and UL 458