Analytic Systems BCD600-32-24

SKU: BCD600-32-24-CT-BC-CA
38A, 24V Out, 30-45V In, Non-Iso DC/DC Battery Charger, 1 Bank
Sector:
Material Handling, Switchgear
Need:
Minimum Quantity
1
My Wishlist
Compare
F-2-4w.png
Description

The BCD600 battery charger outputs up to 600 watts to charge a 12V or 24V battery system (1 or 2 banks) from any higher voltage between 20 and 45 volts. The source and the batteries under charge must share a common ground. Multiple stages of filtering reduce radiated or conducted noise to very low levels.

The two stage charging profile charges the batteries at a constant current until the battery voltage reaches the float voltage that the unit is set to and then the current into the batteries will taper off as necessary to maintain the batteries at the float voltage.

The unit can be left permanently connected without fear of overcharge or damage to the batteries. The adjustable float voltage feature allows the unit to be used for any type of lead-acid battery including lead acid and gel cell.

Features
  • 600 watts of charging power
  • Temperature compensation
  • Manual equalization mode
  • 1 Bank
  • Low EMI
  • Adjustable float voltage
  • Three year parts and labour warranty
  • Typical Service Life : > 10 years (87,600 hrs)

Details

Input Current: 40A
Efficiency: > 90 % at Full Load
Constant Output Voltage: 24V
Output Current: 38A
Duty Cycle: Continuous
Stages: 2 or 3 stage user selectable
Humidity: 0 - 95% Relative Humidity (non-condensing) with standard conformal coating
Isolation Input-Case: > 1500 VDC
Isolation Input-Output: > 1500 VDC
Isolation Output-Case: > 1500 VDC
Input Fuse: AGC 30 x2
Output Fuse: AGC 25 x2
Length: 23.1 CM
Width: 19.8 CM
Height: 10.8 CM
Weight: 2.7 KG

Construction

  • Material and Finish : Marine Grade Black Anodized Aluminum with 18-8 Stainless Fasteners
  • Wall Mount (With Drip Shield)
  • Connections : AC Input - IEC Inlet 26.4mm Tab Flange Mount, DC Output - Phoenix VDFK 4 Connector (Black and Red)

Applications

  • Military
  • Industrial
  • Telecommunications
  • Transportation
  • Alternative Energy

Standards

  • Emissions Meets FCC Part 14, Class B
  • Warranty : Three Years Parts and Labor
  • Safety Built to meet CSA C22.2 No.107.1 and UL 458