Analytic Systems BCA1000-110-12
The BCA1000 provides up to 1000 watts of precision charging power to up to two banks of batteries at 12, 24, 32, 36, 48 or 72(rail) volts DC from a 110 or 220 volts AC power source. The output voltage is easily adjusted 1.0 volts above or below the standard output voltage for standard or deep cycle lead-acid, VRLA or Gel cell type battery.
All models feature user selectable 2-stage or 3-stage charging profiles and temperature compensation for optimum charging. Additionally, user-initiated equalization and voltage temperature compensation greatly increases the lifetime of expensive battery systems.
Extra input and output filtering reduce EMI to extremely low levels and operation is monitored by a bright status indicator LED panel. Reliability features include an input fuse, thermal shutdown, current limiting, reverse battery hookup protection and output short circuit shutdown with automatic recovery.
- 150 watts of charging power
- Two or three bank charging
- Temperature compensation
- Manual equalization mode
- Two or three stage charging profiles
- Low EMI
- Adjustable float voltage
- Three year parts and labour warranty
- Typical Service Life : > 10 years (87,600 hrs)
Details
| Input Voltage: | 90 - 130 VAC |
| Input Current: | 3 Amps with Inrush Protection |
| Input Frequency: | 45 - 65 Hz |
| Efficiency: | > 90 % at Full Load |
| Power Factor: | > 0.98 at Full Load |
| Constant Output Voltage: | 12V |
| Output Current: | 60A |
| Duty Cycle: | Continuous |
| Stages: | 2 or 3 stage user selectable |
| Operating Temperature: | -25°C to +40°C @ maximum output. Derate Linearly 2.5% per °C from 40°C |
| Humidity: | 0 - 95% Relative Humidity (non-condensing) with standard conformal coating |
| Switching Frequency: | 45-65 ± 5% kHz |
| Phase: | Single Phase |
| Isolation Input-Case: | > 1500 VDC |
| Isolation Input-Output: | > 1500 VDC |
| Isolation Output-Case: | > 1500 VDC |
| Input Fuse: | MDA-20 |
| Output Fuse: | ATC-40 x2 |
| Length: | 36.8 CM |
| Width: | 25.1 CM |
| Height: | 12.7 CM |
| Weight: | 5.5 KG |
Construction
- Material and Finish : Marine Grade Black Anodized Aluminum with 18-8 Stainless Fasteners
- Wall Mount (With Drip Shield)
- Connections : AC Input - IEC Inlet 26.4mm Tab Flange Mount, DC Output - Phoenix VDFK 4 Connector (Black and Red)
Applications
- Military
- Industrial
- Telecommunications
- Transportation
- Alternative Energy
Standards
- Emissions Meets FCC Part 14, Class B
- Warranty : Three Years Parts and Labor
- Safety Built to meet CSA C22.2 No.107.1 and UL 458
