Analytic Systems BCD300-32-12

SKU: BCD300-32-12-CT-BC-CA
25A, 12V Out, 20-45V In, Non-Iso DC/DC Battery Charger, 2 Bank
Material Handling, Switchgear
Minimum Quantity
My Wishlist

The BCD300 battery charger outputs up to 300 watts to charge a 12V or 24V battery system (1 or 2 banks) from any higher voltage between 20 and 45 volts. The source and the batteries under charge must share a common ground. Multiple stages of filtering reduce radiated or conducted noise to very low levels.

The two stage charging profile charges the batteries at a constant current until the battery voltage reaches the float voltage that the unit is set to and then the current into the batteries will taper off as necessary to maintain the batteries at the float voltage.

The unit can be left permanently connected without fear of overcharge or damage to the batteries. The adjustable float voltage feature allows the unit to be used for any type of lead-acid battery including lead acid and gel cell.

  • 300 watts of charging power
  • Two or three bank charging
  • Temperature compensation
  • Manual equalization mode
  • 1 or 2 bank charging
  • Low EMI
  • Adjustable float voltage
  • Three year parts and labour warranty
  • Typical Service Life : > 10 years (87,600 hrs)


Input Voltage: 20 - 45 VDC
Input Current: 20A
Efficiency: > 75 % at Full Load
Constant Output Voltage: 12V
Output Current: 25A
Duty Cycle: Continuous
Stages: 2 or 3 stage user selectable
Humidity: 0 - 95% Relative Humidity (non-condensing) with standard conformal coating
Isolation Input-Case: > 1500 VDC
Isolation Input-Output: > 1500 VDC
Isolation Output-Case: > 1500 VDC
Input Fuse: AGC 25
Output Fuse: AGC 30 x2
Length: 23.1 CM
Width: 19.8 CM
Height: 6.4 CM
Weight: 1.8 KG


  • Material and Finish : Marine Grade Black Anodized Aluminum with 18-8 Stainless Fasteners
  • Wall or Shelf Mount
  • Four contact output terminal


  • Military
  • Industrial
  • Telecommunications
  • Transportation
  • Alternative Energy


  • Emissions Meets FCC Part 14, Class B
  • Warranty : Three Years Parts and Labor
  • Safety Built to meet CSA C22.2 No.107.1 and UL 458